Rimage Everest III User Manual
Page 32
Rimage Everest III printer
26
110875_A
Clean the tacky rollers with the Everest cleaning kit
1. Power off the printer.
2. Remove
the
print ribbon.
For specific
instructions, see Changing the print
ribbon. Refer to page 21.
3. To access the tacky rollers, remove
the supply roll from the print ribbon
carrier
.
Note:
The supply roll is the
unused portion of the print ribbon.
4. Clean
the
tacky rollers.
a. Apply
isopropyl alcohol
to the
sponge swab.
b. Use
the
sponge swab
to clean
tacky roller 1
.
c. Use
the
sponge swab
to remove
any waxy buildup from other parts
of the ribbon carrier.
d. Reinstall
the
supply roll
on the
print ribbon carrier.
e. Inside the printer, use the sponge
swab
to wipe tacky roller 2.
5. Prepare
the
printer
for use.
a. Install
the
print ribbon carrier
.
b. Close
all
latches
.
Ribbon
carrier
Tacky
roller 1
c. Close
the
side cover
.
6. Power on the printer. The printer is
ready.
Ribbon carrier
Tacky
roller 2