Rimage Everest III User Manual
Page 37
Rimage™ Cautions and Warnings
110875_A
31
p
u
o
commends installing the printer in a position that allows immediate
k of the unit. Before use, check that it is
as switches, power
rmation or to order a new power
p
0-2483.5 MHz
general authorization is required.
Norway: This subsection does not apply for the geographical area within a radius of
20km from the centre of Ny-Alesund.
Ca tion:
Do not use the printer if it is overheating or an abnormal smell is detected. This may
result in a fire and an electric shock. In case of heating or abnormal smell, immediately
disconnect the cable from the outlet. Contact your Rimage-authorized dealer for repairs.
Allow sufficient free space for opening the printer drawer. Do not touch the printer drawer
while it is moving.
If the side cover is opened while power is supplied, the printer will stop. Do not reach int
the printer while it is operating. Do not attempt to bypass the door interlock.
This printer has no power switch. Power is disconnected completely by unplugging the
cable. Rimage re
disconnection of the power cable. Always hold the plug when disconnecting the cable
from the outlet.
This printer has a voltage slide switch on the bac
set to the correct voltage. Please do not use any voltage other than 110VAC or 220VAC.
This could result in a fire and an electric shock.
All equipment with AC line voltage, or low DC voltages, such
supplies, fuses, fans, non-stepper motors, must be replaced with Rimage-approved
components to maintain the safety approval issued by UL.
Use only the supplied AC power cord. For more info
cord, contact Rimage Customer Service.
This product is designed for an office environment.
Country-specific cautions for Wideband Data Transmission systems; 240
France: Do not use outdoors.
Italy:
If used outside of own premises,