Setting the ringer setting the dialing mode, Setting the ringer, Setting the dialing mode – Radio Shack ET-2105 User Manual

Page 11

Advertising
background image

10

Cautions:

• Be careful not to short the battery pack by touching it with

conducting materials, such as rings, bracelets, and keys. The
battery pack or conductor might overheat and burn.

• Do not open or mutilate the battery pack.

If you have trouble replacing the battery pack, take the phone to
your local RadioShack store for assistance.

Setting the Ringer

OFF/ON RINGER

, on the right side of the handset, controls the key-

pad ringer. To have the phone ring when a call comes in, slide

RINGER

to

ON

. To turn the ringer off, slide

RINGER

to

OFF

.

When

RINGER

is set to

OFF

, the phone does not ring, but you can

still make outgoing calls. If you hear an extension telephone ring,
you can answer the incoming call on this phone. The CHARGE/IN
USE indicator on the base and IN USE/LOW BATT on the keypad
indicator flash until you answer the call.

Setting the Dialing Mode

Set

TONE/PULSE

on the back of the base for the type of service

you have. If you are not sure which type you have, do this simple
test after charging the battery pack.

1. Set

TONE/PULSE

to

TONE

before use.

2. Press

TALK

so the CHARGE/IN USE indicator lights then lis-

ten for a dial tone.

3. Press any number other than

0

and

1

.

Advertising