Radio Shack ET-2105 - Manual (Page 15)

14
Using Mute
To talk to someone else in the room without the person on the oth-
er end of the phone line hearing your conversation, press
MUTE .
Press MUTE again to resume your phone conversation.
Using Flash
FLASH provides the electronic equivalent of a switchhook signal
for special phone service such as Call Waiting.
For example, if you have Call Waiting, press FLASH to answer an
incoming call without disconnecting the current call. Press FLASH
again to return to the first call.
Note: If you do not have any special phone services, pressing
FLASH might disconnect your current call.
Using Tone Services on a Pulse Line
Some special services, such as bank-by-phone, require tone sig-
nals. If you have pulse service, you can still use these tone servic-
es by following these steps:
1. Dial the service’s main number.
2. When the service answers, press TONE /
∗∗∗∗
. Any additional
numbers you dial are sent as tone signals.
3. After you complete the call, press TALK or return the keypad
to the base. The phone automatically resets to pulse dialing.