Radio Shack ET-2105 - Manual (Page 13)

12
per side of the clip into the slots on both sides of the keypad. To
remove the belt clip, pull out on either side of the clip.
OPERATION
Before you use the phone, place the earphone in either ear and
attach the clip to your clothing (see “Using the Earphone” on
Page 11).
Making and Receiving Calls
To make a call, lift the keypad from the base, then press TALK .
You hear a dial tone and the CHARGE/IN USE indicator on the
base and the IN USE/LOW BATT indicator on the keypad light.
Dial the number.
To answer a call, lift the keypad from the base, then press TALK .
The CHARGE/IN USE and IN USE/LOW BATT indicators light.
To end a call, place the keypad on the base or press TALK .
Notes:
• When you press a button, a single tone indicates that the
phone has accepted the command. Three tones indicate that
you pressed a button in error or there is severe interference.
(See “Changing Channels”).
• If interference is severe, the keypad might lose communica-
tion with the base and the call might disconnect. If this hap-
pens, return the keypad to the base for about 5 seconds to
reset the security access-protection code.