Radio Shack 85 - Manual (Page 22)

22
3. Using the mounting holes on the amplifier as a guide, mark the locations for
the mounting holes.
4. Drill 9 /
64
-inch holes in the marked locations, being careful not to damage
anything behind the mounting surface.
5. Attach the amplifier to the mounting surface using the supplied sheet-metal
screws and washers.
6. Reconnect the wiring.
7. Reconnect your vehicle battery’s negative (
-
) cable.
12-1977.fm Page 22 Tuesday, July 13, 1999 10:07 AM