Radio Shack 85 - Manual (Page 3)

3
Mute Turn On Circuit
-
eliminates
the irritating thump noise that some
amplifiers produce when you turn
them on.
Power Indicator
-
lights when power
is on.
Full MOSFET Power Supply
-
pro-
duces enough power to supply the
main amplifier and has a consider-
able amount of reserve power for
peak “high demand” situations.
Short Circuit Protection
-
distorts
sound if any output channel shorts so
you can know to turn off the amplifier.
Important: Be sure your speakers
can handle 340 watts of power (170
watts per channel if you connect the
autosound system to one pair of
speakers, or 85 watts per channel if
you connect the autosound system
to two pairs of speakers). Each
speaker must have an impedance of
at least 4 ohms. Your local Radio
Shack store carries a full line of
speakers.
Note: If the connectors on your vehi-
cle stereo system are not compatible
with the amplifier’s connectors, your
local Radio Shack store sells adapter
harnesses for many vehicles.
12-1977.fm Page 3 Tuesday, July 13, 1999 10:07 AM