Connecting to your autosound system – Radio Shack 85 User Manual
Page 8
8
CONNECTING TO YOUR AUTOSOUND SYSTEM
Low Level Input Connections
You can connect your autosound system’s low-level phono output jacks to the
amplifier’s low-level phono input jacks. For the best results, use shielded audio
cables, such as Cat. No. 42-2368 (not supplied).
Note: For a cleaner, less noisy signal transfer between your autosound system
and the amplifier, the amplifier’s
low input
phono jacks are gold-plated.
1. Temporarily place the amplifier as close as possible to the selected mount-
ing location.
2.
If your autosound system has four phono outputs and you are using four
speakers, connect the autosound system to the amplifier using audio cables
as follows: front-left to
CH1
, front-right to
CH2
, rear-left to
CH3
, and rear-right
to
CH4.
:
12-1977.fm Page 8 Tuesday, July 13, 1999 10:07 AM