Raritan Computer MasterConsole Z - Manual (Page 13)

C HAPTER 2: I NSTALLATION 7
2.3. For MZCIM-SUN:
A. Attach the MZCIM-SUN video (HD15) connector to the computer’s video port.
B. Connect the MZCIM-SUN keyboard/mouse connector (8-pin mini-DIN) to the SUN
computer’s keyboard/mouse port.
C. Connect one end of a Category 5e UTP cable to the O (OUT) Cat5 port on the MZCIM-
SUN. Connect the other end to the Cat 5 Ports In on the User Station (MZUST).
D. If you are not adding more computers to the User Station, insert a TER-ZCIM terminator
in the MZCIM-SUN I (IN) port.
E. A MZCIM-SUN factory name and serial number appear in the Selection Menu of the
User Console attached to the MZUST. This represents the connected computer.
F. To connect additional computers:
ƒ Remove the TER-ZCIM terminator from the (last) MZCIM-SUN I (IN) port and set
it aside.
ƒ Connect one end of a Category 5e UTP cable to the MZCIM-SUN I (IN) port from
which the terminator has been just removed.
ƒ Connect the other end of the Category 5e UTP cable to the O (OUT) port on the next
MZCIM-SUN being added.
ƒ If no more computers are added, insert the TER-ZCIM terminator into the last
MZCIM-SUN I (IN) port.
G. Press the default hot key (Scroll Lock) twice rapidly at the MZUST User Console to
activate the OSD.
H. Press F2 to activate the Selection Menu.
I. The computer you just connected appears as a new channel in the Selection Menu at the
User Console of the MZUST. The MZCIM-SUN factory name and serial number appear.
Note: Installation requires basic operation of On-Screen Display (OSD) menus. Press the default
Hot Key activator (Scroll Lock) twice rapidly to activate the OSD. Function keys F1, F2, and F5
are used to switch OSD menus. PressF1 (while the OSD is on screen) to activate the Help Menu,
which lists all available menu options. When the OSD is onscreen, the user console keyboard’s
Scroll Lock LED indicator blinks. Please see Chapter 3: Operation for additional information on
OSD usage.
Figure 6 On-Screen Display (OSD)