Radio Shack ET-007 - Manual (Page 9)

9
3. Route the modular cord into the
right groove on the mounting
bracket and route the AC adapter's
cord into the left groove.
4. Press up on the handset holder to
remove it, turn it over, then slide it
back down into its slot.
5. Place the phone's two keyhole slots
over the wall plate studs (or the
screws, if you are mounting the
phone on a wall). Press downward
on the phone to secure it.
6. Plug the other end of the modular
cord into the phone line jack and the
AC adapter into a standard AC out-
let.
7. Lift the antenna to a vertical posi-
tion.
315/16
Inches
Handset
Holder
43-007.fm Page 9 Wednesday, March 22, 2000 11:24 AM