Roland FJ-40 - Manual (Page 24)

22
2 Basic Operation
2-5 Printing Test
Before starting to print, carry out a printing test to check the state of the head.
Problems such as missing dots may reduce the printing quality.
If the test results show a problem, carry out head cleaning to restore the head to its normal state.
Load a material, then close the front cover. 1
Press the [CLEANING] key to execute [TEST PRINT]. 2
Press the [ENTER] key to
print a test pattern.
Press the key
HEAD CLEANING
START
HEAD CLEANING
TEST PRINT
Press the [ENTER] key,
head cleaning starts.
If there are any missing dots or other evidence
of a drop in printing quality, clean the head
(see "3-3 Cleaning the Printing Heads").