Russound SIX-SOURCE CONTROLLER CAM6.6 - Manual (Page 111)

SAMPLE CONFIGURATIONS
MULTIPLE CONTROLLERS WITH THREE TUNERS
Sharing an ST2 Dual Tuner with multiple CAM6.6 con-
trollers (with and without tuners)
The configuration below is suitable for 7 to 12 zones
that can access the ST2 Dual Tuner and the CAM6.6T
tuner. This configuration uses RCA “Y” cables from the
ST2 Tuner source outputs to connect to both CAM6.6
source inputs.
CAM6.6T -
Controller Setup Menu: Controller ID = 1
Peripheral Setup Menu: Controller ID = All Controllers
Source Setup Menu: Basic Setup Procedure:
Source # = 2; Source Name = Tuner 2;
Command Type = Peripheral
Source # = 3; Source Name = Tuner 3;
Command Type = Peripheral
Output/Input Switch = Internal Source Output
RCA cable connected from Source 1 audio output on
CAM6.6T (1) to Source 1 input on CAM6.6 (2)
RCA cable connected from ST2 Tuner 1 audio output
to Source 2 input on CAM6.6T (1)
RCA cable connected from ST2 Tuner 2 audio output
to Source 3 input on CAM6.6T (1)
CAM6.6 (no tuner installed) -
Controller Setup Menu: Controller ID = 2
Source Setup Menu: Basic Setup Procedure:
Source # = 1; Source Name = Tuner 1;
Command Type = Peripheral
Source # = 2; Source Name = Tuner 2;
Command Type = Peripheral
Source # = 3; Source Name = Tuner 3;
Command Type = Peripheral
Output/Input Switch = Input
RCA cable connected from Source 1 audio output on
CAM6.6T (1) to Source 1 input on CAM6.6 (2)
RCA cable connected from ST2 Tuner 1 audio output
to Source 2 input on CAM6.6 (2)
RCA cable connected from ST2 Tuner 2 audio output
to Source 3 input on CAM6.6 (2)
CAM6.6
CAM6.6 Back Panel (Controller ID 2)
CAM6.6 Back Panel
(Controller ID 1)
CAM6.6
RS-232 INTERFACE IR L R AUDIO OUTPUT
12VDC 1.5A
IN OUT
NEWMARKET, NH U.S.A. ST2 Smart Tuner
LINK KEYPAD PORTS
TUNER 1 TUNER 2 FM COAX
LOOP ANTENNA FM COAX
LOOP ANTENNA Serial#
MADE IN KOREA
IR L R AUDIO OUTPUT
ST2 Dual Tuner Back Panel
102.5 102.5
92.5 92.5
UNO-S1
UNO-S1
RCA “Y” Cable
RCA Cable RCA Cable
111