Installer – Russound SIX-SOURCE CONTROLLER CAM6.6 User Manual
Page 52
52
INSTALLER
INSTALLATION MENU
2. SOURCE NAME –
Select the name for the source (e.g., DVD, Aux 2, Jazz, etc.).
(Name)
3. COMMAND TYPE –
Select the type of command template (e.g., CD, TV, etc.). Selecting
(CmdTp)
the command type template will tell the CAM 6.6 how to configure the
key’s command and text for the source component.
a. Selected: Learned IR
Choose Learned IR if the pre-programmed IR code library does
(LrnIR)
not support the source component.
i. LEARNED SRC –
Select the learned source bank to be assigned to the source
(LnSrc)
component. (See Learning IR procedure for instructions on how
to learn IR codes.)
ii. TEMPLATE TYP –
Select the template type to define what type of source compo-
(TType)
nent is being used. (This will tell the CAM6.6 how to configure
the key commands and text for the source component if it is a
learned source.) Procedure advances to USE NUM IR? (step 7).
b. Selected: Unassigned
The template for the selected source is cleared. (All key
(Unasg)
assignments and other source settings will be erased.)
Procedure advances to SAVE CHANGES (step 10)
c. All Other Selections:
Procedure advances to DEVICE CODE (step 4)
4. DEVICE CODE –
Enter source component code number listed in this manual’s
(DevCd)
Reference section.
5. TEST IR? –
If “Yes” is selected, the CAM6.6 sends a power command to the
(TstIR)
source component. If “No” is selected, the procedure advances
to USE NUM IR? (step 7)
6. SUCCESS? –
If the power to the source component was turned off, select
(OK?)
“Yes” otherwise select “No.” By selecting “No” the Procedure
returns to DEVICE CODE (step 4) to allow selection of another
code number from the provided list.
7. USE NUM IR? –
Indicates the source component has numeric scrolling, such as
(NumIR)
multi-disc CD player (See NUMERIC IR Setup Procedure for
advanced settings or more information). “No” advances menu to
AUTO PLAY (step 9).
8. HIGHEST NUM –
Enter the highest possible number; for example, a 100-disc CD
(High#)
player would have a max number of 100.