Ricoh 43-3808A User Manual
Page 12
12
Operation
than 7 seconds, or the maximum
message length is reached, the system
hangs up and resets to answer the next
call. The number flashes to indicate a
new incoming message has been
recorded.
When the system is answering a call or
recording a message, if any phone on
the same line is picked up or the
system detects a Calling Party Control
(CPC) signal, it stops playing the
outgoing message or recording an
incoming message and resets to
answer another call.
Many local phone companies use
Calling Party Control (CPC) to signal
that the caller has hung up. Your
system can recognize a CPC signal
and release the line. If the system
records phone company messages or
dial tones, your local phone company
probably does not use CPC.
If
<B
<B
<B
<B
flashes on the display, the
system’s memory is full. It answers
calls after 10 rings. The caller hears
“No one is available to take your call”
when the system answers, and the
caller cannot leave a message. The
system then hangs up. The system
cannot record additional messages
until you delete some of the old