Ricoh 43-3808A - Manual (Page 9)

Pre
paration
9
3. While holding down SKIP/TIME
SET/CHECK, press MEMO/2 WAY/
HOUR . The system announces “1
AM”.
&' &' &' &'
appears on the display.
Repeatedly press MEMO/2 WAY/
HOUR until you hear or see the
correct hour.
4. While holding down SKIP/TIME
SET/CHECK, press PLAY/PAUSE/
MIN . The system announces “01”.
&' &' &' &'
appears on the display.
Repeatedly press or hold down
PLAY/PAUSE/MIN until you hear or
see the correct minute.
5. Release SKIP/TIME SET/CHECK .
The system announces the day
and time you set.
6. To hear the current day and time,
press SKIP/TIME SET/CHECK while
the system is on or off.
5 '66+0) " 6*' "0 7/$'4 " 1( "
4
+0)5
To control the duration before the
system answers a call, slide
RING
SELECT on the system’s right side to
the desired number of rings ( 2 , 4 , 7 or
TS ).
TS (Toll Saver) – If you choose the Toll
Saver option, and there are new
±
"016'5"
±
"
• When you hold
down PLAY/
PAUSE/MIN, the
system will move
forward by 10
minutes until it
reaches 00.
• If you have not set
the day and time
and you press
SKIP/TIME SET/
CHECK, the
system announces
“Please set time”.