Ricoh 43-3808A - Manual (Page 16)

16
Operation
To listen to messages, press PLAY/
PAUSE/MIN . The system plays each
new message and the sequence
number appears. The system
announces the day and time the
message was recorded. After you play
all the new messages, the display
shows the total number of recorded
messages, and the system
automatically saves the messages and
resets to answer calls.
To pause while listening to message,
press
PLAY/PAUSE/MIN .
FFFF
appears on
the display. The playback resumes
when you press
PLAY/PAUSE/MIN
again, or the system returns to answer-
ready mode after 7 seconds if you do
not press
PLAY/PAUSE/MIN again.
To replay the messages, press PLAY/
PAUSE/MIN .
During message playback, you can
repeat the current message by
pressing
REPEAT/ANNC/DAY , repeat a
previous message by holding down
REPEAT/ANNC/DAY for over 1 second,
or skip forward to the next message by
pressing
SKIP/TIME SET/CHECK .
To stop message playback at any time,
press
ON/OFF/STOP .
±
"016'5"
±
"
• If there are no
messages, the
system sounds two
tones.
• Each message will
be treated as a new
message until you
play back the entire
message.