Radio Shack ET-910 - Manual (Page 12)

12
PREPARATION
INSTALLING THE
BATTERY PACK
To install the supplied rechargeable
battery pack, place it on the battery
compartment tracks, then slide it up
(toward the antenna) until it locks in
place.
Note: You must charge a new battery
pack at least 24 hours before you use
it the first time.
When the handset’s battery pack no
longer recharges, replace the battery
pack. You can order a replacement
battery pack from your local Radio
Shack store.
To remove the battery pack, press
the tab on the back of the handset,
slide the battery down (away from the
antenna) until it stops, then lift it up to
remove it.
Note: The phone uses one recharge-
able nickel-cadmium battery pack. At
the end of the battery’s useful life, it
must be recycled or disposed of
properly. Contact your local, county,
or state hazardous waste manage-
ment authorities for information on
recycling or disposal programs in
your area. Some options that might
be available are: municipal curbside
collection, drop-off boxes at retailers,
recycling collection centers, and
mailback programs.
CHARGING THE
BATTERY PACK
You must charge the battery pack at
least 24 hours before you use the
ET-910 the first time or when you re-
place the battery. To charge or re-
charge the battery pack, simply place
the handset on the cradle. The
CHARGE indicator lights.
HANDSET IN USE
1
4
7
2
5
8
3
6
9
GHI
PRS
ABC
JKL
TUV
DEF
MNO
WXY
CHARGE
CORDLESS • SPEAKERPHONE ET-910
CHARGE
Indicator
43-1085.fm Page 12 Tuesday, August 17, 1999 2:31 PM