Onkyo HT-R520 - Manual (Page 6)

6
Front & Rear Panels
Front Panel
For detailed information, refer to the pages in
parenthesis.
A STANDBY/ON button (31)
This button is used to set the HT-R520 to On or
Standby.
B STANDBY indicator (31)
This indicator lights up when the HT-R520 is in
Standby mode, and it flashes while a signal is being
received from the remote controller.
C STEREO button (39)
This button is used to select the Stereo listening
mode.
D LISTENING MODE [ ] [ ] buttons (39)
These buttons are used to select the listening modes.
E DISPLAY button (33)
This button is used to display various information
about the currently selected source.
F DIGITAL INPUT button (31, 45)
This button is used to assign the digital inputs and to
specify the format of digital input signals.
G Display
H Remote control sensor (9)
This sensor receives control signals from the remote
controller.
I Arrow buttons
These buttons are used to select and adjust settings.
TUNING [ ] [ ] buttons
These buttons are used to tune into radio stations.
PRESET [ ] [ ] buttons
These buttons are used to select radio presets.
J ENTER button
This button is used to confirm settings.
K MASTER VOLUME control (32)
This control is used to set the volume of the
HT-R520.
L SPEAKER A & B buttons (32)
These buttons are used to turn speaker sets A and B
on and off.
M PHONES jack (37)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
N TONE, [–] & [+] buttons (36)
These buttons are used to adjust the bass and treble.
O MULTI CH button (33)
This button is used to select the multichannel DVD
input.
P Input selector buttons (31, 32, 43)
These buttons are used to select the input sources.
Q MEMORY button (34, 35)
This button is used to preset radio stations.
R TUNING MODE button (34)
This button is used to select the Auto or Manual
Tuning mode.
S SETUP button
This button is used to access various settings.
T RETURN button
This button is used to return to the previous screen
when changing settings.
U VIDEO 3 INPUT (27)
These S-Video, composite video, and analog audio
inputs can be used to connect a camcorder or games
console.
STANDBY/ON
PHONES
STANDBY
DISPLAY TONE TUNING MODE DIGITAL INPUT LISTENING MODE STEREO MEMORY
RETURN SETUP
VIDEO 2 TAPE TUNER C D VIDEO 3 DVD VIDEO 1
VCR
MULTI CH
SPEAKERS B A
MASTER VOLUME
ENTER
S VIDEO VIDEO AUDIO L R
VIDEO 3 INPUT
CLEAR
TUNING
PRESET
HT-R520
1 2 3 4 5 7 8 9 K 6 J
N L M P O Q R S T U