16 powering up and setting the clock, Powering up the cr-l5 first time setup, Turning off accuclock – Onkyo CR-L5 User Manual
Page 16: Connect the power cord to a suitable wall outlet, Press the [enter] button
16
Powering Up and Setting the Clock
Before connecting the power cord, complete all connections
(see page 11 to 15).
1
Connect the power cord to a suitable
wall outlet.
The CR-L5 enters Standby mode, and the STANDBY
indicator comes on.
2
To turn on the CR-L5, press the
[STANDBY/ON] button or the remote
controller’s [ON] button.
The CR-L5 comes on, the display lights up, and the
STANDBY indicator goes off.
To turn off the CR-L5, press the [STANDBY/ON] but-
ton or the remote controller’s [STANDBY] button. The
CR-L5 enters Standby mode and the STANDBY indi-
cator comes on.
The very first time you turn on the CR-L5, the ACCU-
CLOCK function automatically sets the clock by using the
CT (Clock Time) information present in RDS radio broad-
casts.
While the clock is being set, “Wait” flashes on the display,
as shown. It may take up to five minutes to set the clock.
When the clock has been set, the message “Clock Adjusted”
scrolls across the display, then the day and time are dis-
played for a while, as shown.
If the clock has not been set correctly, see “Displaying the
Day & Time” on page 17.
The ACCUCLOCK function automatically updates the
clock daily at 2 A.M., 3 A.M. and 2 P.M..
If you don’t want ACCUCLOCK to automatically update
the clock at 2 A.M., 3 A.M. and 2 P.M. everyday, you can
turn it off as follows.
1
Press the [TIMER] button repeatedly
until “Clock” appears on the display,
as shown.
2
Press the [ENTER] button.
“AccuClock” appears on the display, as shown.
If “Manual Adj.” appears, use the Up/Down [ ]/[ ]
buttons to select “AccuClock”.
3
To turn off ACCUCLOCK, press the
[DISPLAY] button.
The asterisks disappear, indicating that the ACCU-
CLOCK function is off.
To turn the ACCUCLOCK function on again, press the
[DISPLAY] button so that asterisks appear.
Powering Up the CR-L5
First Time Setup
DISPLAY
STANDBY / ON
PHONES
DIRECT
MEMORY FM MODE
CLEAR
PRESET
SPEAKERS A / B
STOP
PLAY
PAUSE
INPUT
TUNING
STANDBY
STANDBY/ON
DISPLAY
STANDBY indicator
Turning Off ACCUCLOCK
ON
STANDBY
ENTER
TONE
TIMER
DIRECT
SLEEP
VOLUME
UP
DOWN
CLOCK CALL
DIMMER
DISPLAY
CDR
C D
TAPE
PLAY MODE
REPEAT
CLEAR
MUTING
1
2
▼
▲
3
4
5
6
7
8
9
▲
▼
INPUT
10/0
>10
ON
STANDBY
TIMER
ENTER
DISPLAY
CLOCKCALL
These asterisks appear when
the ACCUCLOCK function is on