Onkyo CR-L5 - Manual (Page 27)

27
Timers— Continued
If you select AM or FM, use the Up/Down [ ]/[ ]
buttons to select a preset, and then press [ENTER].
In this example, preset #2 has been selected.
4
Use the Up/Down [ ]/[ ] buttons to
select Once or Every, and then press
[ENTER].
Once: For one-off use.
Every: For weekly use.
5
Use the Up/Down [ ]/[ ] buttons to
select one of the following options,
and then press [ENTER].
SUN (Sunday) FRI (Friday)
MON (Monday) SAT (Saturday)
TUE (Tuesday) Everyday
WED (Wednesday) Days Set
THU (Thursday)
The “Everyday” and “Days Set” (specifies a range of
days) options only appear if you select “Every” in step
4.
If you select “Days Set”, use the Up/Down [ ]/[ ]
buttons to select the first day, and then press
[ENTER].
In this example, the first day is Tuesday.
Use the Up/Down [ ]/[ ] buttons to select the last
day, and then press [ENTER].
In this example, the last day is Sunday.
6
Use the number buttons to enter the
ON time, and then press [ENTER].
To enter, for example, 7:29, press [10/0], [7], [2], and
[9].
Use the [>10] button to toggle between AM and PM for
the 12-hour format.
After the ON time has been set, the OFF time is auto-
matically set to one hour later.
7
Use the number buttons to enter the
OFF time, and then press [ENTER].
The TIMER indicator appears, as shown.
In this example, timers #1 and #3 have been set.
8
Press the [STANDBY] button to set the
CR-L5 to Standby mode.
Notes:
• You can cancel the timer setting procedure at any time by
pressing the [TIMER] button.
• If you’re using a timer to start playback, be sure to set the
volume to a suitable level. If the VOLUME control is set
to minimum, you won’t hear anything when the timed
playback task starts.
• If you set the playback source to CD, don’t forget to load
a CD into the CR-L5 before setting it to Standby mode.
• If you’re using a timer to start recording on an Onkyo cas-
sette tape deck connected via , be sure to select the
correct input source on the cassette tape deck, and load a
cassette tape before switching the CR-L5 to Standby
mode.
• For timed recording, it’s a good idea to set the start time
a little before the actual start time of the program that you
intend to record.
OR