Onkyo CR-L5 - Manual (Page 5)

5
Precautions— Continued
Memory backup
The CR-L5 uses a battery-less memory backup system in
order to retain radio presets and other settings when it’s
unplugged or in the case of a power failure. Although no
batteries are required, the CR-L5 must be plugged into an
AC outlet in order to charge the backup system.
Once it has been charged, the CR-L5 will retain the settings
for several weeks, although this depends on the environment
and will be shorter in humid climates. The clock setting is
not retained by the backup system.
Features
• 2
×
50 watts at 4
Ω
, 1 kHz, DIN
• 4 Ω speaker drive capability
• WRAT (Wide Range Amplifier Technology)
*1
• VLSC (Vector Linear Shaping Circuitry) *2
• Direct mode
• full-function remote control
• 4 timers for auto playback or recording
• 3-level display dimmer
• Optical and coaxial digital outputs
• Subwoofer preout
• CDR and TAPE inputs/outputs
• A and B speaker outputs (Binding-post speaker termi-
nals)
• RDS (Radio Data System), including PS (Program Ser-
vice Name), RT (Radio Text), and CT (Clock Time)
• 40 radio presets
*1. Wide Range Amplifier Technology improves the imaging, realism, and accuracy of sound material.
*2. A proprietary Onkyo D/A converter, featuring Pulse Noise Reduction.
This unit contains a semiconductor laser system and is
classified as a “CLASS 1 LASER PRODUCT.” So, to
use this model properly, read this Instruction Manual
carefully. In case of any trouble, please contact the store
where you purchased the unit. To prevent exposure to
the laser beam, do not try to open the enclosure.
DANGER:
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK FAILED OR
DEFEATED. DO NOT STARE INTO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARD-
OUS RADIATION EXPOSURE.
This label is located on the rear panel. It indicates that:
1. This unit is a CLASS 1 LASER PRODUCT and
employs a laser inside the cabinet.
2. To prevent the laser from being exposed, do not
remove the cover. Refer servicing to qualified per-
sonnel.
Declaration of Conformity
We, ONKYO EUROPE
ELECTRONICS GmbH
LIEGNITZERSTRASSE
6, 82194 GROEBENZELL,
GERMANY
GROEBENZELL, GERMANY
ONKYO EUROPE ELECTRONICS GmbH
I. MORI
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN60065, EN55013, EN55020 and
EN61000-3-2, -3-3.