Onkyo MD-101A - Manual (Page 36)

36
Editing the contents of an MD (continued)
To erase all tracks of an MD
1 Press the button.
2 Press the EDIT/NO button and turn the MULTI
JOG knob to select “All Erase ?”
To cancel, press the EDIT/NO button or press
the button.
3 Press the MULTI JOG knob. “All Erase??” is
displayed for confirmation.
4 Press the MULTI JOG knob again.
When the erasing of all tracks on the MD is
complete, “Complete” appears in the display.
Note
While the TOC indicator is lit or flashing, do not
move or unplug the MD recorder.
Dividing a track
The following operation is possible when the
playback is in progress or paused.
1
Pause a track at the desired
dividing point.
2
Press the EDIT/NO button and
turn the MULTI JOG knob to
select “Divide ?”
4
Fine-adjust the dividing point.
To fine-adjust the dividing point...
Turn the MULTI JOG knob while listening to
the part that contains the dividing point.
You can adjust the point in the range of –
45 to +45 in steps described below. (The
step varies depending on the selected
recording mode.)
Adjustment step
SP: approx. 0.06 seconds
MONO and LP2: approx. 0.12 seconds
LP4: approx. 0.25 seconds
Dividing point
Play
MULTI JOG
TRACK
3
Press the MULTI JOG knob.
The point at which the track is to be
divided plays repeatedly, with “Rehearsal”
and “Position OK?” alternately shown on
the display.
EDIT / NO
MULTI JOG
MULTI JOG
MINIDISC RECORDER
DISC LOADIING MECHANISM
DISPLAY
MD - 101A
STANDBY / ON
STANDBY
CD
DUBBING PUSH TO ENTER
MULTI JOG
EDIT / NO YES
REC REC MODE INPUT
EDIT/NO
,
MULTI JOG
TRACK
To stop dividing a track
Press the EDIT/NO button until “Divide?”
disappears, or press the button.