Oki ES3640E - Manual (Page 139)

6
6-139 Imposition settings
ES3640e MFP EFI Job Management Guide - 139
Custom —Enables the Scale Factor and Finished Height and Width
fields, so that you can specify new scaling values. The original
height and width values are displayed for your reference. When
you specify a value, DocBuilder Pro automatically updates the
other fields to preserve the height-to-width aspect ratio of the
page.
Clipping indicators
If you supply scaling values that would cause the page to print
past the edge of the sheet, DocBuilder Pro provides a visual
warning. When the window is in Layout mode, any clipped page
edge is highlighted in yellow. When the window is in Preview
mode, the Clipping icon appears to the left of the Scale Factor
field. In addition, the appearance of the page preview itself makes
scaling problems obvious—content truncates at the edge of the
preview sheet, just as it would on a printed sheet.
Alignment and Offsets
The Alignment and Offsets settings are enabled when you choose
Custom from the Scale Mode menu in Mixed Page mode. You
cannot change Alignment and Offsets settings in Fixed Page
mode.
Clipping icon
Clipped page edge