Oki ES3640E - Manual (Page 166)

7
7-166 Fiery WebSpooler and Fiery Spooler
ES3640e MFP EFI Job Management Guide - 166
Hold queue jobs —When printing requires an operator (because
the Print queue and Direct connection are disabled), the operator
must assign a destination to all jobs received from users on the
network (Icon 1). Once assigned, jobs move down the Spool
queue for processing (Icons 2, 3, and 4). All jobs printed to the
Hold queue require routing by an operator.
Print queue jobs —When printing does not require an operator,
network jobs sent to the Print queue appear in the Spool area,
where they are displayed with a white printer icon (Icon 2). When
jobs reach the head of the queue, they are RIPped and printed
without operator intervention.
Direct Connection —Jobs printed to the Direct connection are not
displayed in the job lists. They are displayed briefly in the status
bars (where they cannot be selected) and are included in the Job
Log.
RIP area
The job icons in the RIP area are as follows:
After a job is rasterized, it goes into the RIP area. The RIP area
holds only jobs with raster data. Jobs in the RIP area are either
waiting for the printer to be free (Print queue jobs, Icon 2), or
they are being held (Icon 1). Held jobs in the RIP area have
RIP area icon What it indicates
How long you see
the job
1 Raster data, no
destination defined;
may have been printed
before and held Until it is deleted,
moved to the Archive
window, or stripped of
its raster data and
sent to the Spool area
2 Raster data headed for
Print in its turn; no
hold defined Until printer is free to
print the job