Oki ES3640E - Manual (Page 211)

C
C-211 Troubleshooting
ES3640e MFP EFI Job Management Guide - 211
If you have configured the Fiery and set up client computers and
network servers according to guidelines in the
Configuration
Guide and the User Software Installation Guide , try printing a Test
Page (in Command WorkStation or Command WorkStation LE,
choose Print Pages from the Server menu).
If you can print the Test Page but still cannot print a document
from a remote computer, contact the system administrator to
troubleshoot the network connection.
If you are unable to connect, and you cannot print the Test Page,
check the ES3640e MFP control panel display.
Setup error messages
For information on Setup error messages, see Appendix A of the
Configuration Guide.
If this happens Try this
The printer is not in
Standby mode. The printer’s Automatic Power-Off function
may have shut down the printer.
Turn the printer on, and then try printing a Test
Page again when the printer has warmed up.
You still cannot print
a
Test Page.
Make a copy. If you can make a copy, restart
the Fiery, and when you see Ready to Print on
the ES3640e MFP control panel display, try
printing a Test Page again. If the Test Page still
fails to print, contact your Oki dealer.