Olympus E-PL2 - Manual (Page 54)

54 EN
Other shooting options
2
When a RAW image is selected using [OVERLAY], the JPEG image for the image
recorded in JPEG+RAW is displayed.
When shooting multiple exposures using bracketing, priority is given to multiple
exposure shooting. While the overlay image is being saved, bracketing is reset to
the factory default setting.
Varying settings over a series of photographs
(bracketing)
The camera automatically varies exposure, white balance, fl ash level, or
sensitivity over a series of exposures, “bracketing” the current setting. Bracketing
is available in P, A, S, and M modes.
1
Select [BRACKETING] in shooting menu
X (P. 108).
OFF
o
OFF
0.0
OFF
j / Y
IMAGE STABILIZER
BRACKETING
MULTIPLE EXPOSURE
w
# RC MODE
BACK SET
2
Choose a bracketing type.
0 is displayed in the monitor. •
BRACKETING
BACK SET
WB BKT
AE BKT
FL BKT
ISO BKT
--
--
--
A
--
G
--
AE BKT (AE bracketing)
The camera varies exposure by 0.3 EV, 0.7 EV, or 1.0 EV over three shots.
In single-frame shooting mode, one photograph is taken each time the shutter
button is pressed all the way down, while in sequential shooting mode the camera
continues to take shots in the following order while the shutter button is pressed all
the way down: no modifi cation, negative, positive. Number of shots: 2, 3, 5, or 7
The 0 indicator turns green during bracketing.
The camera modifi es exposure by varying aperture and
shutter speed (mode P), shutter speed (modes A and
M), or aperture (mode S).
The camera brackets the value currently selected for
exposure compensation.
The size of the bracketing increment changes with the
value selected for [EV STEP].
g “Custom menu”
(P. 78)
•
•
•
•
BRACKETING
BACK SET
WB BKT
AE BKT
FL BKT
ISO BKT
--
--
--
A
--
G
--
AE BKT
2F 0.7EV
2F 0.3EV
3F 0.3EV
OFF
2F 1.0EV
•
•