Flash shooting, Using a fl ash (fl ash photography) – Olympus E-PL2 User Manual

Page 56

Advertising
background image

56 EN

Flash shooting

3

3

The built-in fl ash can be set manually as required

.

The built-in fl ash can be used

for fl ash photography in a variety of shooting conditions.

Using a fl ash (fl ash photography)

1

Slide the fl ash switch to raise the fl ash.

2

Press the

# button (I) to display options.

3

Use

HI to choose a fl ash mode and press

Q.

The options available and the order in which they are displayed vary depending on
the shooting mode.

g “Flash modes that can be set by shooting mode” (P. 104)

AUTO

Auto fl ash

The fl ash fi res automatically in low light or
backlight conditions.

#

Fill-in fl ash

The fl ash fi res regardless of the light conditions.

$

Flash off

The fl ash does not fi re.

*1

!/H

Red-eye reduction
fl ash

This function allows you to reduce the red-eye
phenomenon. In S and M mode, the fl ash
always fi res.

#

SLOW

Slow synchronization
(1st curtain)

Slow shutter speeds are used to brighten
dimly-lit backgrounds.

!SLOW

Slow synchronization
(1st curtain)/Red-eye
reduction fl ash

Combines slow synchronization with red-eye
reduction.

#

SLOW2/

2nd

CURTAIN

Slow synchronization
(2nd curtain)

The fl ash fi res just before the
shutter closes to create trails
of light behind moving light
sources.

#

FULL

Manual (FULL)

*2

For users who prefer manual operation. Flash
output is expressed as a fraction of full power:
1/4, 1/16, or 1/64.

#

1/4

Manual (1/4)

*2

#

1/16

Manual (1/16)

*2

#

1/64

Manual (1/64)

*2

*1 Both the built-in fl ash and optional external fl ash units turn off.
*2 Built-in fl ash only.

4

Press the shutter button all the way.

#

Caution

In [

!/H(Red-eye reduction fl ash)], after the pre-fl ashes, it takes about 1 second

before the shutter is released. Do not move the camera until shooting is complete.
[

!/H(Red-eye reduction fl ash)] may not work effectively under some shooting

conditions.
When the fl ash fi res, the shutter speed is set to 1/180 sec. or slower. When shooting
a subject against a bright background with the fi ll-in fl ash, the background may be
overexposed.

Flash shooting

Advertising