Olympus E-PL2 - Manual (Page 77)

77 EN
Camera setup
9
9
Setup Menu
Use the Setup Menu to set the basic camera
functions.
For details on using the menu lists, see “Using the
menus” (P. 21).
X
W
s
REC VIEW
FIRMWARE
ENG.
j ±0 k±0
5SEC
’--.--.--
--:--
BACK SET
c/# MENU DISPLAY
Option Description g
X (Date/
time setting)
Set the camera clock.
7
W
(Changing
the display
language) You can change the language used for the on-screen display
and error messages from ENGLISH to another language.
—
s (Monitor
brightness
adjustment) You can adjust the brightness and
color temperature of the monitor.
Color temperature adjustment will
affect only the LCD monitor display
during playback.
Use
HI to switch between
j (color temperature) and k
(brightness), and use FG to
adjust the value between [+7] – [–7].
s
–5 +2
BACK SET
—
For information on adjusting the brightness and color temperature
of the electronic view fi nder, see [EVF ADJUST].
g “Accessory port menu options” (P. 90)
REC VIEW Choose whether pictures are displayed immediately after
shooting and for how long. This is useful for making a brief
check of the picture you have just taken. Pressing the shutter
button halfway while checking the picture lets you resume
shooting immediately.
[1SEC] – [20SEC]: Selects the number of seconds to display
each picture. Can be set in units of 1
second.
[OFF]: The picture being recorded to the card is
not displayed.
[AUTO q]: Displays the image being recorded, and
then switches to playback mode. This is
useful for erasing a picture after checking it.
—
c/# MENU
DISPLAY
Choose whether to display the custom menus or accessory
port menu. 78,
90
FIRMWARE Your product’s fi rmware version will be displayed. When you
make inquiries about your camera or accessories or when
you want to download software, you will need to state which
version of each of the products you are using.
—
Camera setup