Sylvania SY4100 - Manual (Page 3)

2
•
Read Instructions – All the safety and operating instructions should be read before
operating this equipment. These instructions should be retained for future reference
•
Heed Warnings – All warnings on the equipment and in the operating instructions
should be adhered to. All instructions regarding care and operation of this
equipment should be followed.
•
Pow er Sources – Equipment should only be connected to the power supply
specified in the operating instructions or as marked on the equipment.
•
Grounding or Polarization – Take precautions that the equipment is properly
grounded. Take note that the power supply is fitted in the correct input jack (
marked DC 12V ), and auxiliary units ( external siren and strobe light ) are fitted into
the correct external jack points.
•
Power-Cord Protection – Keep cable cords and plugs clear of other objects,
particularly at the point where they exit the equipment.
•
Cleaning – Clean the equipment by wiping with a soft cloth, ( do not use any
abrasive agents or water ).
•
Non-use Periods – Power cords should be unplugged from the outlet when left
unused for a long period of time.
•
Object and Liquid Entry – Take care not to drop objects or liquids on any part of
the equipment.
•
Damage Requiring Service – The alarm should be serviced by a qualified service
personnel when:
- The power-supply cord or the plug has been damaged, or
- Objects have fallen, or liquid has been spilled onto the equipment, or
- The equipment has been exposed to rain, or
- The equipment does not appear to operate normally or exhibits a marked
change in performance, or
- The equipment has been dropped, and/or the enclosure has been
damaged.
•
Servicing – Do not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to a Qualified
Distributor’s Service Personnel.
•
System Maintenance – Under normal use your system requires virtually no
maintenance other than regular testing. It is recommended that you test your
system once a week, and replace the batteries at least once every 6 months (or as
needed).
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE OR POWER ADAPTER TO WATER OR MOISTURE
IMPORTANT NOTE: IF YOU RETURN TO YOUR PREMISES AND FIND THAT
THE ALARM IS IN PROGRESS, DO NOT ENTER, AS A FIRE OR AN INTRUDER
MAY BE PRESENT. GO TO A NEIGHBOR AND CONTACT THE RELEVANT
LOCAL AUTHORITIES FROM THERE.
Important Safety Instructions