Oki ES3640E - Manual (Page 18)

18
scanner power supply. then connect the other end
to the power strip.
6. Uncoil the DCD cable and mount the ferrite cores
(1) on either end of the USB data cable, next to
the ferrite cores built into the cable (cable and
ferrite cores are supplied in the scanner box: see
page 15), then attach the DCD cable lines to the
back of the scanner.
7. Secure the DCD cable to the top back of the shelf
using one of the cable clips and one of the
medium screws (“Accessories in Scanner Box” on
page 15).
8. Use the tie wraps to attach the scanner power
supply cable to the DCD cable in two places.
ES3640e MFP 48.jpg
ES3640e
MFP 57a.jpg
ES3640e MFP 49.jpg
ES3640e
MFP 107
crop.jpg
ES3640e MFP 102.jpg