Oki ES3640E - Manual (Page 19)

19
Step 6 Attach the Printer to
the Stand
1. Mount the brackets on the back of the printer:
a. Remove the two screws shown in the
illustration from the back of the printer.
b. Attach the printer brackets. Use two small
screws at the top and one long screw at the
bottom of each bracket (see “Accessories in
the Stand Box” on page 10).
2. Connect the printer power cord (supplied in the
printer box) to the printer.
Important!!
Do not connect this product to an
uninterruptible power supply (UPS). For
further information please contact Oki Data
at 1-800-OKIDATA .
ES3640e MFP 29.jpg
ES3640e MFP 30 crop.jpg
Be sure to use the 15A AC power cord
supplied with the printer. Use of a power
cord NOT supplied with this printer, or an
extension cord, may result in overheating,
and could be a safety hazard.
Fire Hazard Warning Icon.jpg
ES3640
e MFP
30a.jpg