Oki ES3640E - Manual (Page 22)

22
3. Connect the ferrite core end of the Ethernet cable
to the printer, then connect the opposite end to
the network.
Install the Software
See the Software Install Guide and CDs supplied with
the printer.
Test the Scan and Print
Function
ES3640e MFP Basic System
1. Make sure the Copy Mode screen (the default) is
displayed. If it is not, press the Copy key on the
scanner.
2. Place a document face up on the ADF or face
down on the scanner glass.
3. Press the Start key on the scanner.
ES3640e MFP System with the
Optional Finisher Installed
1. Make sure the Copy Mode screen (the default) is
displayed. If it is not, press the Copy key on the
scanner.
2. Select the Finishing tab on the touch screen.
3. Select the desired finisher options on the touch
screen.
4. Place a document face up on the ADF or face
down on the scanner glass.
5. Press the Start key on the scanner.
ES3640e MFP 67.jpg
NOTE
If the paper jams, the finisher is not correctly
aligned with the printer.
Adjust the leveling feet on the finisher until the
paper feeds through smoothly.
ES3640e MFP 64 Right.jpg