Oki ES3640E - Manual (Page 20)

20
3. Move the printer back toward the stand.
4. Connect the printer power cord to the power strip.
5. Use the thumbscrews to attach the printer to the
bumper brackets on either side of the stand.
6. Connect the DCD cable lines to the printer.
7. Secure the lower end of the DCD cable to the left
side of the stand (above the power strip) using
one of the cable clips and one of the medium
screws.
ES3640e MFP
52.jpg
ES3640e MFP 58a.jpg
ES3640e MFP 53.jpg
ES3640e MFP 59a.jpg
ES3640e MFP
55.jpg
ES364
0e MFP
106a.j
pg