Onkyo CR-505 - Manual (Page 27)

27
Other Functions
With this function you can temporarily mute the output of
the CR-505.
1
Press the remote controller’s [MUTING]
button.
The output is muted and the MUTING indicator flashes
on the display, as shown.
2
To unmute the CR-505, press the [MUT-
ING] button again, or adjust the remote
controller’s volume [ ]/[ ] buttons.
The output is unmuted and the MUTING indicator
goes off.
Note: The Mute function is cancelled when the CR-505 is
set to Standby.
With the Bass and Treble functions you can adjust the tone
of the sound to your personal preference.
1
Press the [DIRECT] button to select
“DIRECT OFF.”
2
Use the [BASS] or [TREBLE] control on
the CR-505 to adjust the bass or treble.
In Direct mode, the bass and treble tone circuits are
bypassed, creating a shorter signal path for a purer sound.
1
Press the [DIRECT] button to select
“DIRECT ON.”
2
To turn off Direct mode, press the
[DIRECT] button again to select “DIRECT
OFF.”
Muting the CR-505
STANDBY / ON INPUT MENU BASS TREBLE
PUSH TO ENTER
PRESET DIRECT PHONES
VOLUME
MIN MAX
DIRECT TREBLE
BASS
DIRECT
TAPE
CD
MD
MUTING
--/---
7
8 9
10/0
4
5 6
2 3
1
CLOCK CALL
TIMER
CLEAR
REPEAT
DISPLAY
SLEEP
MODE
ENTER
INPUT
STANDBY/ ON
MUTING
DIRECT
VOLUME UP
VOLUME DOWN
MUTING
Adjusting the Bass & Treble
Using Direct Mode