Omega Vehicle Security FPU5-MT-110 - Manual (Page 49)

4. When the display flashes the RPM or FLOW RATE setting you desire, press the
TIME key.
The display shows the current TIME setting (xx:xx:xx) with either the HOURS,
MINUTES, or SECONDS flashing.
5. To change the HOURS setting, press the TIME key repeatedly, until the HOURS
flash. Use the UP and DOWN ARROW keys to enter the HOURS setting you
desire. Figure 6-6 shows the Time range.
Figure 6-6. TIME Range
6. To change the MINUTES setting, press the TIME key repeatedly, until the
MINUTES flash. Use the UP and DOWN ARROW keys to enter the MINUTES
setting you desire.
Range
ᮡ
00:00:00
00:00:01
.
.
00:00:59
00:01:00
.
.
00:58:59
00:59:00
.
.
00:59:59
01:00:00
01:00:01
.
.
12:59:59
Range
ᮢ
12:59:59
12:59:58
.
.
12:59:00
12:58:59
.
.
12:00:00
11:59:59
.
.
00:00:01
00:00:00
xx:xx:xx
TIME
ACTION
Displays current
TIME setting
Display shows
Operating the Pump Motor in the RUNNING Display Mode 6
6-12