Onkyo HT-RC180 - Manual (Page 16)

16
Remote Controller
—Continued
■ Controlling the tuner
To control the AV receiver’s tuner, press the [TUNER]
(or [RECEIVER]) button.
You can select AM or FM by pressing the [TUNER] but-
ton repeatedly.
1
Arrow [ ]/[ ] buttons
Used to tune into radio stations.
2
D.TUN button (66)
(TUNER remote mode only)
Selects the Direct tuning mode.
3
DISPLAY button
Displays information about the band, frequency,
preset number, and so on.
4
CH +/– button (67)
Used to select radio presets.
5
Number buttons (66, 67)
Used to select radio stations directly in the Direct
tuning mode. Also you can select a preset directly.
Note:
An Onkyo cassette recorder connected via
can also
be controlled in Receiver mode (see page 133).
TX-NR807_En.book Page 16 Tuesday, July 28, 2009 12:00 PM