On-Q/Legrand REV.O 1307877 User Manual
Page 16
Page 12
301 Fulling Mill Road, Suite G
©Copyright 2005 by On-Q/Legrand, Inc All Rights Reserved.
Middletown, PA 17057
www.onqlegrand.com
(800)-321-2343
NOTE: Once you have logged in, for security reasons, you should change the Password.
Be sure to document the new Password. For details on changing your Password see the
Firmware Upgrade section.
C. Wireless Security Setup
Follow these procedures to setup the correct security protocols for your WAP.
1. Select Simple Setup (see Figure 17).
8. The SSID (Service Set Identifier) field displays the SSID of this device. You can change it to
a more user friendly name and click on Apply at the bottom of the screen to make the
change.
NOTE: The SSID you choose will remain as selected, unless the reset button is
pressed, which brings the unit back to its factory default settings.
9. Enabling the Response to Broadcast SSID requests option allows the device to broadcast
its SSID in a wireless network, which allows other wireless devices to scan and establish
communication with the device. Unchecking this option (what we recommend) hides the
SSID to prevent other wireless devices from recognizing and connecting to the device.
Figure 17