Oki S700 - Manual (Page 15)

INSTALLATION > 15
INSTALLING UTILITIES FROM THE CD-ROM
The utilities you need to install depend on how you plan to use your
Scancopier:
l
For copying and/or scanning, install both the Printer Profile
Utility (so that, if required, you can update the color profiles or
firmware) and the TWAIN Utility.
Details of how to use the Printer Profile Utility are given in
Appendix A.
The copying function is described in the chapter entitled
“Using S700 as a copier”.
The scanning function is described in the chapter entitled
“Using S700 as a scanner”.
To operate the S700 at optimum speed, the following minimum
requirements are recommended:
IBM compatible PC (Pentium or later);
Microsoft Windows 98/Me, Windows 2000/XP;
One USB port available;
100 Megabytes of available hard disk space for
installation;
32 Megabytes of RAM (64 Megabytes or higher
recommended);
VGA monitor;
A Microsoft Windows-compatible pointing device (e.g.,
a mouse);
A CD-ROM drive.
Follow the steps below, omitting step 5(b).
l
For copying, scanning and messaging (scanning to e-mail or
fax among other functions), install the Printer Profile Utility,
TWAIN Utility and Unimessage Pro Utility.
The Unimessage Pro functions are described in the chapter
entitled “Using S700 with Unimessage Pro”.