Oki S700 - Manual (Page 46)

MENUS AND SETTINGS > 46
JOB OPTIONS KEY
This key is used to change settings for the next copying job. Press the
Job Options key to advance through the items, and the
▲/▼ keys to
change their settings. Pressing Select is not required, since these
values are not saved.
The default values for each item are those chosen in the Menu key
table above. Values changed with this key will revert to their default
settings after about 3 minutes of inactivity.
Press All Clear to reset all temporary settings back to their user
default values (those defined using the Menu key) immediately.
Press and hold All Clear to reset all settings back to their factory
defaults.
Item Settings Explanation
Media Plain Paper, Ultra Heavy,
Transparency Selects the type of media to be
printed on.
Duplex Off, ShortEg, LongEg Selects single-sided (Off) or
double-sided copying (from
single-sided originals).
Input Tray Auto, MP Selects the printer feed tray.
Output Prt/F-Dn, Prt/F-Up, Fin/F-Up,
Fin/F-Dn Selects output stacking tray if the
printer supports this feature.
Collate On, Off
Fit to A3 Off, On Adjusts magnification to fit A3
paper if printer supports this
size.
Punch Off, Top Edge, Left Edge Selects output hole punching if
the printer supports this feature.
Staple Off, On Selects output stapling if the
printer supports this feature.