On-Q/Legrand HMS 1100 - Manual (Page 38)

Page 30
An event is logged after three unsuccessful attempts are made to log into the system from a remote phone, the HMS 1100 will
lock out remote telephone access for 1 hour to discourage any further attempts to access the system - See Telephone Control.
Local access of the system using an in-house telephone is not recorded.
The event log will also record each time the PC Access software is used to access the system. The event log displays the code
used to access the system and "PC ACCESS".
Messages
The Message menu is used to play and record the memo message and to quickly clear all text messages. The memo message is an
eight-second voice message. It's like an "electronic notepad" for a family member to leave a handy message. After a message is
recorded, it can automatically be played back when someone returns and disarms the security system.
The Message menu is also used to show, log, clear, and send text messages, and to say and phone (dial out) your voice messages.
To enter the Message menu, from the top-level display or from the main menu, press the 8 (MESSAGE) key on the console.
MESSAGE
1=PLAY 2=RECORD 3=CLEAR
↕
8=MESSAGE
↑
Record Memo Message
Note: To Record the memo message using this key, the HMS Two-Way Audio Module (with a microphone) must be installed.
To record a new voice memo message, press the 2 (RECORD) key.
HMS 1100 will say, "Record Message". At the beep, record your eight-second message. HMS 1100 will beep a second time at
the end of the eight seconds, which signifies the end of the record process.
After a new message is recorded, the display will show "CHECK MESSAGE".
Play Memo Message
Note: To Play the memo message using this key, the HMS Two-Way Audio Module (with a speaker) must be installed.
To play the voice message, press the 1 (PLAY) key.
Over the speaker, HMS 1100 will say, "Message is" - HMS 1100 will then play your eight-second message.
• HMS 1100 will automatically play a new memo message when the security system is disarmed.
• After the message has been played, the display will no longer show "CHECK MESSAGE".
Clear Text Messages
If any text messages are currently being displayed on the console, they can be deleted by pressing the 3 (CLEAR) key.
When you press the 3 (CLEAR) key, all messages are cleared from the console display.