On-Q/Legrand HMS 1100 - Manual (Page 44)

Page 36
Press the temperature zone you wish to control, then press #.
Press the ' 0 ' key to select all HMS Thermostats. This is a simple way to broadcast the new Heat or Cool setting or change the
system mode, fan mode, or hold mode of all HMS thermostats in your system.
When the HMS Communicating Thermostat is entered:
"THERMOSTAT 1 - "THERMOSTAT 1" - TEMPERATURE IS (TEMP)."
"PLEASE
CHOOSE:
1: MODE
2: HEAT SETTING
3: COOL SETTING
4: FAN
5: HOLD
#: STATUS
*: CANCEL
- If the # (STATUS) key is selected, HMS 1100 will read the current status of the thermostat. For instance:
"TEMPERATURE IS (80), HEAT SETTING IS (60), COOL SETTING IS (75),
MODE IS (COOL), FAN IS (AUTO), HOLD IS (OFF)."
6 - Status
Press 6 from the MAIN MENU to get to the STATUS menu.
From the Status menu, HMS 1100 will report the Security Mode (for the current Area).
If all zones are secure and there are no troubles with the system, HMS 1100 reports "System OK".
If any zones are currently not ready, in trouble, or bypassed, HMS 1100 will report the current status of those zones. Any system
troubles are also reported.
Finally, HMS 1100 will report the current Outdoor Temperature (if part of the system) and the current time and date.
7 - Events
Press 7 from the MAIN MENU to get to the EVENT menu.
The HMS 1100 will read the 3 latest events. Press the ' 7 ' key for HMS 1100 to read 3 more events, or ' * ' to cancel.
8 - Message
This command allows you to record and verify the voice memo message, allows you to record and play custom messages
(phrases), and allows you to record and verify your address. If an optional HMS Two-Way Audio Module is being used, this
command also allows paging and listening to the premises.
Press 8 from the MAIN MENU to get to the MESSAGE menu.
"MESSAGE - PLEASE CHOOSE: 1 PLAY MESSAGE, 2 RECORD MESSAGE, 3 INTERIOR, 6 PLAY PHRASE,
7 RECORD PHRASE, 8 PLAY ADDRESS, 9 RECORD ADDRESS, *: CANCEL."
To play the current address, press the 8 key.