Oki OFFICE 87 - Manual (Page 14)

14 OKIOFFICE 87 Setup Guide
Components 2
LINE Terminal
Terminal for connecting the
unit to an outside telephone
line.
TEL Terminal
Terminal for connecting the
MFP machine to an external
telephone.
Power Switch
AC Power Inlet
Plug the AC power cord, supplied with
your MFP machine, into this inlet.
PC Connector
Plug the computer cable
into this connector.
LED Print Head
This black bar is the part of
your MFP machine which
writes received or copied
images onto the image drum
unit. You should clean this bar
each time you change your
toner cartridge.
Toner Cartridge
This black cylinder,
installed inside the image
drum unit, contains the
black powder which is
your MFP machine’s ink.
You need to install a new
toner cartridge when the
REPLACE TONER CART
message appears on the
display.
Image Drum Unit
The image drum unit contains the
green photosensitive drum which
receives images from the LED
print head and transfers them to
the printing paper.