Oki OFFICE 87 - Manual (Page 37)

Components 37
Function key, and then press the One-Touch key labeled with the
function you want to use. When programming or selecting other
functions, pressing the Select Function key a second time returns
you to the standby mode.
11 COPY Key: After loading a document, press this key to make a
copy. When no documents are loaded, press this key once to obtain
a Message Confirmation Report about your last transmission on the
LCD Display Panel, and a second time to receive a printed report.
You can also use the Copy key as a shortcut for programming One-
Touch keys and Auto Dial numbers. After you have loaded a docu-
ment and manually dialed a telephone number, press Copy to
instantly program that number into a One-Touch Key or Auto Dial
number.
12 STOP Key: This key cancels the operation currently in progress
and turns off the Alarm Indicator. After loading paper or installing a
new toner cartridge, press this key to cancel alarm conditions after
the condition has been corrected. When programming, pressing the
Stop key takes you back step-by-step through the programming
functions you have already selected.
13 START Key: Press the Start key to initiate the operation indicated
on the display or to confirm information you have entered into the
display. When the MFP machine is in power save mode, press the
Start key to exit power save mode.
14 ALARM Indicator: When there is a problem, this indicator lights
(red) and an alarm sounds. To turn the alarm indicator off, press the
Stop key and correct the problem.
15 8/+ key (One-Touch key 8): Each fax number you enter or program
into your MFP machine can be up to 40 digits long. If you need to
dial a number which is longer than 40 digits, you can dial a number
using any combination of One-Touch keys, Auto Dial numbers or the
numeric keypad. When programming a chain dial number into a
One-Touch key or Auto Dial number, press the 8/+ key at the end of
the first part of the number to indicate to the MFP machine that this
is a chain dial number.
16 10/PAUSE Key (One-Touch key 10): Use this key on the
One-Touch keypad to enter automatic 3-second pauses in dialing
when programming telephone numbers. For example, you may
want to use this key to tell your machine to wait for an outside or
international line to open. Pauses in telephone numbers are marked
by a “P” symbol.