Onkyo AV RECEIVER HT-R8230 - Manual (Page 11)

11
R L R L
FRONT
SPEAKERS A
FRONT
SPEAKERS B
R L
SURROUND
SPEAKERS
CENTER
SPEAKER AC OUTLET
ANTENNA FM
75 AM
DIGITAL
OUT
VIDEO
OUT
AUDIO
OUT
VIDEO
IN
AUDIO
IN
R L R L L R
L R
VIDEO
OUT
AUDIO
OUT
VIDEO
OUT
AUDIO
OUT
L R
VIDEO
OUT FRONT CENTER SUBWOOFER SURR
L R
AUDIO OUT
COAXIAL
DVD player or component
with 5.1 ch output (DVD)*
1
Video cassette player,
Satellite tuner, LD
player
* 3 , etc. (VIDEO 2)
VCR (VIDEO 1)
Audio/video
connection
cable
Audio (R)
Signal flow
Coaxial cable
(Digital signal)
Coaxial plug
Connecting to audio/video equipment
* 1 If the DVD player has both 5.1 channel audio outputs and 2 channel audio outputs, and you want to connect the DVD player only using
the FRONT L/R jacks on the HT-R8230, use the 2 channel audio output jacks on the DVD player.
If the DVD player only has the 2 channel audio outputs, connect it to the FRONT L/R jacks.
* 2 To connect the digital output from DVD player connected to the DVD jacks to this unit, use the COAXIAL input jack.
To connect the digital output to the OPTICAL input jack of this unit, it is required to change the assignment of digital inputs to input
sources by referring to “Setting the digital inputs” on page 21.
* 3 If you have an LD player with AC-3RF output, connect via an AC-3RF demodulator to one of the HT-R8230’s DIGITAL INPUT
terminals.
Audio (L)
Video
Caution
Make sure that the capacity of the other components connected
to this unit does not exceed the capacity that is printed on the
rear panel (120 watts).
To connect the digital
output from satellite
tuner etc. connected to
the VIDEO 1, VIDEO 2
or VIDEO 3 jacks to the
COAXIAL or OPTICAL
input jack of this unit, it is
required to change the
assignment of digital
inputs to input sources by
referring to “Setting the
digital inputs” on page
21.
DO NOT connect the
power cord at this
time.
Video Camera,
Game Device, etc.
(VIDEO 3)
* 2