Connecting antennas, Connecting the supplied fm and am indoor antennas, Usa, canada, mexico – Onkyo AV RECEIVER HT-R8230 User Manual

Page 14

Advertising
background image

14

ANTENNA

FM

75

AM

Connecting the supplied FM and AM indoor antennas

Connecting antennas

Note

Insert one end of the AM antenna cord to either of the AM antenna connectors and the other end to the other connector. There is no difference
between one end of the AM antenna cord and the other end, unlike the speaker cables which have positive and negative poles.

Adjusting the position of the AM indoor antenna

The AM loop antenna is for indoor use only. Set it in the direction and position where you receive signals clearly. Put it as far away as
possible from the HT-R8230, televisions, speaker cables, and power cords.

When reception is not satisfactory with the attached AM loop antenna alone, connection of an outdoor antenna is recommended.

AM indoor antenna

Insert into the
hole.

Rotate the outer frame
of the antenna.

Extend the
antenna cord.

Press and hold up
the lever.

Insert the end of the
cord.

Release the lever to
secure the connection.

R

L

R

L

FRONT

SPEAKERS A

FRONT

SPEAKERS B

R

L

SURROUND

SPEAKERS

CENTER

SPEAKER

AC OUTLET

ANTENNA

FM

75

AM

ANTENNA

Adjusting the position of the FM indoor antenna

The FM indoor antenna is for indoor use only. During use, extend the antenna and move it in various directions until the clearest signal is
received. Fix it with push pins or similar implements in the position that will cause the least amount of distortion.

If the reception is not very clear with the attached FM indoor antenna, the use of an outdoor antenna is recommended.

ANTENNA

FM

75

AM

USA, Canada, Mexico

1

Strip away the insulation from
the end of the cord.

2

Fully insert the stripped end of
the cord.

Advertising
This manual is related to the following products: