Oliso Touch & Glide - Manual (Page 10)

steam/spray system
Spray
• press the spray button for a strong mist spray
• the spray will help with wrinkle removal
Burst of Steam
• firmly press the steam button for a strong burst of steam from the soleplate.
• the steam button can only be used when the iron is heated to the cotton or linen
range (
••• ).
• wait at least 3 seconds between each press of steam button.
Vertical Steam
• to steam vertically press the steam button while holding the iron upright.
• this is useful for getting creases and wrinkles out of hanging clothes or curtains.
• wait at least 3 seconds between each press of the steam button.
Steam Selector: Slide the steam selector to set the amount of constant steam. The iron can
only produce steam when the fabric selector knob is set to the cotton or linen range (
••• ).
Allow the iron to heat up (steady green status light) before activating the steam control.
Steam will be produced as soon as the iron is lowered.
Dry Ironing: To turn off the steam, slide the steam selector off ( ).
Auto Anti-Drip: Your Touch&Glide TM iron has an anti-drip feature which shuts off steam
production any time the iron is raised by the Auto-Lift TM spacers. This prevents unwanted
steam while the iron is standing. This feature also reduces water dripping from the soleplate
while the iron is not hot enough to produce steam. To prevent dripping entirely, keep the
steam selector in the off ( ) position.