Important safety instructions, Special instructions – Oliso Touch & Glide User Manual

Page 2

Advertising
background image

1 ) Use iron only for its intended use.
2 ) To protect against a risk of electric shock, do not immerse the iron in water or other liquids.
3 ) The iron should always be turned to “Off” before plugging or unplugging from the outlet. Never yank

cord to disconnect from the outlet; instead, grasp plug and pull to disconnect.

4 ) Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely

around iron when storing.

5 ) Always disconnect iron from electrical outlet when filling with water or emptying and when not in use.
6 ) Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk

of electric shock, do not disassemble the iron, take it to a qualified serviceman for examination and
repair. Incorrect reassembly can cause a risk of electric shock when the iron is used.

7 ) Do not allow children to use iron. Close supervision is necessary for any appliance being used near

children. Do not leave iron unattended while connected or on an ironing board.

8 ) Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam

iron upside down – there may be hot water in the reservoir.

9 ) If the malfunction indicator goes on, the flatiron is not operating normally. Disconnect from the power

supply and have the flatiron serviced by qualified service personnel.

10 ) When using vertical steam function, do not point the iron towards yourself or anybody else.

SAVE THESE INSTRUCTIONS

When using your flatiron, basic safety precautions should always be followed, including the following:

Read all instructions before using this product.

1 ) This is a 1440 watt appliance. To avoid a circuit overload, do not operate another high wattage

appliance on the same circuit.

2 ) If an extension cord is absolutely necessary, a 12 ampere cord should be used. Cords rated for less

amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or
tripped over.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

SPECIAL INSTRUCTIONS

Advertising