Oliso Touch & Glide - Manual (Page 8)

water tank
Open the Flip Funnel TM . If you need to add water during ironing, unplug the
iron and repeat the above steps. After filling, make
sure the iron is fully reheated before ironing.
Alternatively, fill directly
from a faucet holding
the iron horizontally.
Do not fill the tank past
the MAX fill line on the
side of the iron. Close
the port when done.
Leave the iron in a
horizontal position and
fill using the included fill
cup. Two fill cups equal
the maximum capacity
of the water tank.
This iron is designed to be used with regular tap water. If
your water is over 12 grams of hardness we recommend
using either inexpensive bottled spring water or mixing half
tap water with half distilled water. Never use 100% distilled
water as this can cause the iron to spit and leak.
water recommendations
Before filling, slide the
steam selector to off ( ).
Make sure the iron is
unplugged.