Oliso Touch & Glide - Manual (Page 11)

If the Touch&Glide
TM
iron is not being used while it is plugged in, the status light will flash red and the iron will
turn itself off. The auto shut-off timing depends on whether the Auto-Lift TM system is turned on or off. The iron
will return to normal operation once you resume ironing.
auto shut-off system
Auto-Lift TM off ( )
8 minutes unused
8 minutes vertical
Auto-Lift TM on ( )
30 seconds knocked over
30 seconds after,
spacers lift iron*
8 minutes vertical
30 seconds knocked over
iron position
iron position auto shut-off timing
auto shut-off timing
*when the Auto-Lift TM system is off and the iron is left unused in a horizontal position for more than 30 seconds,
the spacers will raise the iron to prevent burning your fabric or ironing surface.