Omega Vehicle Security DRA-DCC-8 - Manual (Page 3)

Contents
1. MOUNTING INSTRUCTIONS
2. REPLACING FUSES
3. ASSEMBLY
4. SUPPLY VOLTAGE
5. MODES OF OPERATION
5.1 0-20 or 4-20mA output current selection
5.2 Switch Settings
6. PARALLEL CONTROL MODE
6.1 PLC Interface
6.2 The "E" (ENABLE) Terminal
7. SERIAL CONTROL MODE
7.1 RS232c / RS422 Select
7.2 RS422 Termination
7.3 Serial Control Switch Settings
7.4 Serial Communication Parameters
7.4.1 Baud Rate Select
7.4.2 ID Code
7.4.3 Command Formats
8. SELF TEST MODES
8.1 Self Test # 1
8.2 Self Test # 2
8.3 Self Test # 3
9. MULTIDROP CONFIGURATION
10. PUTTING THE UNIT INTO OPERATION
11. CALIBRATION
12. SPECIFICATIONS
1